Rolling Service Doors
Emergency Repair Services | Licensed, Bonded, and Insured | Free Estimates
Emergency Repair ServicesLicensed, Bonded, and InsuredFree Estimates
Turn to Us for Rolling Service Doors
Garage Door Operators provides high-quality commercial rolling service doors in Beckley, WV, Charleston, WV, Huntington, WV, and the surrounding areas. Count on us to install rolling service doors from Wayne Dalton or Cornell. Read about the features of the products below.
Rolling service doors give you rugged dependability for all of your applications. Fire Doors, coiling grilles, industrial steel coiling doors, and weather-safe doors are all options at Garage Door Operators.
So, whether it's enormous Titan rolling doors, protective FireStar rolling steel fire doors, ventilated Secur-Vent doors, or secure Accordion folding grilles, you can feel confident that with Wayne Dalton's many years of knowledge and experience, you'll get the best possible solution for your building application needs.
Call
Garage Door Operators to learn more! Get a FREE
estimate!
Rolling Service Door Model 800C Insulated
ThermoTite™ insulated rolling doors improve thermal efficiency!
Key Product Features:
Key Product Features:
- Polyurethane insulation, R-value = 7.7
- Standard max width 42’*
- Standard max height 30’
- Max steel gauge = 18
- Steel, aluminum, or stainless steel construction
- Wind load 20 PSF standard, options up to 55 PSF
- *Larger sizes may be available
Options and Accessories:
- Polyurethane insulation, R-value = 7.7
- Standard max width 42’*
- Standard max height 30’
- Max steel gauge = 18
- Steel, aluminum, or stainless steel construction
- Wind load 20 PSF standard; options up to 55 PSF
- *Larger sizes may be available
Rolling Service Door Model 800 and 900 Non-Insulated
Rolling doors to meet your most demanding and rigorous applications!
Key Product Features:
- Standard max width 40’
- Standard max height 40’*
- Steel, aluminum, or stainless steel construction
- Heavy-duty 2 or 3” flat or curved slats
- Wind load 20 PSF standard; options up to 55 PSF
- *Larger sizes may be available
Options and Accessories
- Secur-Vent® perforated slats
- Vision slat
- Open fenestration slat
- Over-sized Titan™ for large door application, such as hangar door (up to 70’ wide)
- High wind load
- Articulating windlocks for operational windload
- Brush seal for curtain, lintel brush, and hood baffle
- Manual chain hoist
- Motor operator
- Bottom bar sensing edges
- Anti-drop devices (including Wayne Dalton's proprietary DSD - Drop Stop Device, and brake devices)
- Exhaust ports
- Sloping bottom bars
- Mullions
- Optional powder coat finish
- Pass door
Wayne Dalton Advanced Systems - 800 / 800C ADV
High-traffic solution with lasting durability!
Key Product Features:
- Max standard width: 20'
- Max standard height: 20'
- Control panel: electronic VFD*
- Controller with microprocessor
- 800 curtain: 3" flat slats, powder coat (gray, beige, white)
- 22-ga. steel with alternating endlocks
800C Curtain pattern: 3" insulated flat slats (#34 profile), hardened powder coat (gray, beige, white) 22-ga. steel front / 24-ga. steel backer with alternating endlocks. R-value of 7.7, sound transmission class rating of 22.
Options and Accessories
- Flat insulated or non-insulated slat profile in a variety of gauges
- Vision / ventilation: 5" x 3/4" open fenestration; 5" x 3/4" acrylic vision lite
- Perimeter seals: surface guide weatherstrip, angled guide brush seal, exterior lintel weather seal, interior weather baffle, high usage guide weatherstrip (do not select if wind load is required)
- Wind load: minimum of +/- 20 PSF up to +/- 55 PSF; options available to meet up to Dade County – Florida Building Commission High-Velocity Hurricane Zone
- Custom color options
- Actuators - loop detectors, radio control, push buttons, motion detectors and pull cords
Share On: